2.2' Wheel Widener

2.2" Wheel Widener

4 Review(s) Write a Review

Your Price: $8.25

2.2" Wheel Widener

Questions about this item? Ask here.

Part Number: 299H

Availability: In Stock

Quantity

Description
Customer Reviews
Questions and Answers

NOW SOLD INDIVIDUALLY!

Our 2.2" Wheel Wideners are designed to add 7.25mm of width to the face of any of our 2.2 wheels. They will also fit any wheel using the Axial AX10 2.2" wheel beadlock ring mount pattern.

With these wideners you will get increased section width so your tires will look fatter and you will get that "deep dish" look to your wheels. You will also have more room for foams and weights.

To use these wideners, insert one between your wheel and tire. Then, utilizing M2x14 screws, affix the ring to the wheel & passing the screws through the widener.

What's included:
-1x 2.2" Wheel Widener with a Hand Finish.

Dimensions:
Bead Diameter - 2.2"
Width - 7.25mm

Weight ~ .5oz each

HARDWARE IS REQUIRED BUT NOT INCLUDED!

To use these wideners with our wheels you will need 6 longer screws PER WHEEL.

The longer screws replace the M2x7 screws that clamp the ring to the wheel.

The screws that thread into your ring SHOULD NOT be changed as some longer screws may not be fully threaded (see last pic in gallery).

For standard Wideners you need M2x14 screws.

For stacked standard Wideners you need M2x21 screws.

We suggest you use the same head style (scale hex or socket) as the screws threaded into your rings.

M2x14 Screws
M2x21 Screws

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Great fit and finish!

These wheel wideners were exactly what I was looking for to marry with my DCW wheels! Like the title says, fit and finish were perfect!

Did you find this helpful?

Reviewed by: (Verified Buyer) Chris Sato from Sacramento, Ca on 4/15/2016

Great product, great deep dish look

I added pair of these to each of my Locked-Up Trailready wheels to get the width I wanted for the Pro-Line Super Swamper. Put one widener on the front and rear of each wheel. They give the wheels a great deep dish look and increase track width when used on the front of the wheel. When used on the rear of the wheel you still get the increase in width but retain the shallow dish look and track-width some prefer. Originally purchased the Wideners to see if they fit some cheap Integy and Boom Racing wheels. The fit fine and gave those wheels great look too, but I bought the Locked-Up Trailready wheels and Sever rings for the Super Swampers.

Did you find this helpful?

Reviewed by: (Verified Buyer) Eric Donald from Southern USA on 3/2/2016

2.2" Wheel Widener (pair)

I have used these to widen the Ikari wheel both on the inside and out to make the wheel super wide. Locked up Rc Wheels are some of the most versatile wheel on the market.

Did you find this helpful?

Reviewed by: (Verified Buyer) David Peterson from Chandler,AZ on 5/3/2015

Awesome

These are really nice. They give the wheel some depth

Did you find this helpful?

Reviewed by: (Verified Buyer) Rob Hartwig from San Jose CA on 2/26/2015

Q: What wheels do these wideners fit on

Asked by: Cody - 6/7/2020

A: Our wheels and rings are made to work together. Other than a few specific exceptions that we know of, we can't say what will/won't fit together.

Wheels we know WILL work with our rings:
Our 1.9" Rings and wideners will fit original SCX10 plastic 6 hole bead lock wheels, Redcat Racing plastic 1.9" 6 hole bead lock wheels and 1.9" Incision KMC (KM233, etc) Hex wheels by making use of our M2x1 screws in the additional 18 threaded holes in our rings. Meaning you will use 6 M2x7 screws to hold our ring to the wheel. The additional 18 holes in the rings will be filled with M2x1 screws as they are just for show (we call them faux).

If using wideners you can run 6 M2x14 (or m2x21 for double wide) to hold the widener & ring to the wheel The remaining 18 of the holes can use M2x7. (Wideners have not been tested on Incision wheels yet).

The same is true of our 2.2 rings with the original Axial AX10 plastic 6 hole bead lock wheels. 6 M2x7 & 18 M2x1, etc.

Our rings will also fit CNC Customs wheels the same way (6 M2x7 & 18 M2x1, etc) "IF" they are made to work with our ring pattern. You'll need to confirm the pattern in your wheels with CNC customs though as we have no way of knowing what one you have & they make a few types.

Wheels we know WILL NOT fit our rings:
Vanquish, Chanquish, SSD, Mayhem

Anything not listed above means we have not tested them. So we cannot guarantee anything one way or the other.

I hope that helps!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Locked Up RC (2/12/2025)

Submit an answer

Questions about this item? Ask here.

M2 x 14 socket head screws (28) black

$3.99

In Stock

Add To Cart

M2 x 14mm Scale Hex Bolts (30) Black

$6.25

In Stock

Add To Cart

M2 x 14mm Scale Hex Bolts (30) MC Zinc

$6.25

In Stock

Add To Cart

M2 x 14mm Scale Hex Bolts (30) SS

$6.25

In Stock

Add To Cart

2.2" Wheel Widener (C)

$8.25

In Stock

Add To Cart

2.2" Wheel Widener

Rating Snapshot

Average Customer Ratings

Q: What wheels do these wideners fit on

Related Items

Recently Viewed Items