2.2' Agile Red (G)

2.2" Agile Red (G)

Write a Review

Your Price: $8.25

2.2" Agile Red

Questions about this item? Ask here.

Part Number: 251redG

Availability: In Stock

Quantity

Description
Questions and Answers

Updated color - 10/10/23

Our 2.2" Agile bead lock ring is designed to replicate most heavy duty 1:1 bead lock rings.

Made of high quality aluminum, this ring is drilled to match the Axial AX10 2.2" bead lock ring mounting pattern.
Each ring is machined, blast finished then anodized red.

What's included:
-1x 2.2" Agile Red beadlock ring

Dimensions:
Bead Diameter - 2.2"
Width - 3mm
Weight - .4oz

Our Easy Mount® wheel system only uses 6 screws to hold the ring to the wheel, making your life much easier when working with foams and weights. An additional 18 screws thread into the ring and slide into larger holes in our Easy Mount® wheels. We suggest M2x7 (or M2x8) screws to hold the ring on. The remaining 18 screws can be M2x8 or shorter.

If you do not have our Easy Mount® wheels you can still use our Easy Mount® rings by using 18 of our M2x1 screws to thread into the ring.

If you already have your own M2 hardware of your choice, you can cut it flush with the back of the ring like we used to do for all our installations: Old School Video (action starts ~ 3:00)

No hardware is included with our rings but is available below.

M2x7 Scale Hex Bolts:
Stainless Steel, Black Oxide, Multi Color Zinc

M2x1 Scale Hex Bolts:
Stainless Steel, Black Oxide, Multi Color Zinc

M2x7 Cap Screws:
Stainless Steel, Black Oxide, Multi Color Zinc

Trademark & Patent Information

Q: Will these rings fit the ssd 2.2 wheels

Asked by: Morgan Fiorenza - 6/5/2020

A:

Hi [Customer],
Our wheels and rings are made to work together. Other than a few specific exceptions that we know of, we can't say what will/won't fit together.

Wheels we know WILL work with our rings:
Our 1.9" Rings and wideners will fit original SCX10 plastic 6 hole bead lock wheels, Redcat Racing plastic 1.9" 6 hole bead lock wheels and 1.9" Incision KMC (KM233, etc) Hex wheels by making use of our M2x1 screws in the additional 18 threaded holes in our rings. Meaning you will use 6 M2x7 screws to hold our ring to the wheel. The additional 18 holes in the rings will be filled with M2x1 screws as they are just for show (we call them faux).

If using wideners you can run 6 M2x14 (or m2x21 for double wide) to hold the widener & ring to the wheel The remaining 18 of the holes can use M2x7. (Wideners have not been tested on Incision wheels yet).

The same is true of our 2.2 rings with the original Axial AX10 plastic 6 hole bead lock wheels. 6 M2x7 & 18 M2x1, etc.

Our rings will also fit CNC Customs wheels the same way (6 M2x7 & 18 M2x1, etc) "IF" they are made to work with our ring pattern. You'll need to confirm the pattern in your wheels with CNC customs though as we have no way of knowing what one you have & they make a few types.

Wheels we know WILL NOT fit our rings:
Vanquish, Chanquish, SSD, Mayhem

Anything not listed above means we have not tested them. So we cannot guarantee anything one way or the other.

I hope that helps!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Locked Up RC (2/13/2025)

Submit an answer

Questions about this item? Ask here.