Our 1.9" 2026 Texas Crawlfest Bead Lock Rings are a Limited Edition run, with a maximum of 10 sets made!
Last year we brought the 2025 sets of 4 to Crawlfest and were hammered by people asking for them before we could even finish setting up.
In order to avoid that hot mess, we are making these available here before hand.
These sets will only be available here and NOT in our booth.
So, buy them now while you can!
Ordering for these will end after all sets are gone, or 2 weeks out from the event (4/9/26)
This gives us time to make them and get them into the mail for you.
The design is physically engraved into a black anodized blank.
What's included:
-4x 1.9" 2026 Texas Crawlfest bead lock rings with a
Black anodized & engraved finish
--You have the option to add a color to the engraving!
Dimensions:
Bead Diameter - 1.9"
Width - 3mm
Weight - .25oz
Our Easy Mount® wheel system only uses 6 screws to hold the ring to the
wheel, making your life much easier when working with
foams and weights.
An additional 18 screws thread into the ring and slide into larger holes
in our Easy Mount® wheels. We suggest M2x7 (or M2x8) screws to hold the
ring on. The remaining 18 screws can be M2x8 or shorter.
If you do not have our Easy Mount® wheels you can still use our Easy
Mount® rings by using 18 of our M2x1 screws to thread into the ring.
If
you already have your own M2 hardware of your choice, you can cut it
flush with the back of the ring like we used to do for all our
installations:
Old School Video (action starts ~ 3:00)
No hardware is included with our rings but is
available below.
M2x7 Scale Hex Bolts:
Stainless Steel,
Black Oxide,
Multi Color Zinc
M2x1 Scale Hex Bolts:
Stainless Steel,
Black Oxide,
Multi Color Zinc
M2x7 Cap Screws:
Stainless Steel,
Black Oxide,
Multi Color Zinc Trademark & Patent Information
Hello, Guest! 
[ITEMPRICE]