AO8™ Axle Flanges - 525 Phoenix Portal

AO8™ axle flanges work with our AO8™ style wheels.
These pin style flanges mount directly to your axle shaft and remove the need for a hex hub.
This version is specifically made to work on the Vanquish VS4-10 Phoenix with Portals.
The center holes on this version may not work on other vehicles so please see our other listings if you do not have a VS410 with portals.

AO8™ axle flange numbers indicate material between the pin and wheel mount face:
285 = 2.85mm
685 = 6.85mm
885 = 8.85mm

*Our 285 Phoenix axle flanges, used with our standard width/offset 1.9" wheels will give a narrower track width compared to the stock Phoenix wheel setup (#4 hubs) by about 6mm per side. **Our 735 Hex Flanges, used with our Phoenix Wheel Hexes & standard width/offset 1.9" wheels will give the same track width as the stock Phoenix wheel setup (#4 hubs).