We have redesigned this kit for 2019 to not only eliminate your slipper, but also the slop that is commonly found in the stock setup!
Tired of dealing with that Axial slipper clutch in your SCX10 II kit?
Eliminate it with our new "Slipper Eliminator Kit"!
- Slipper elimination will cause you to have power at all times -
- Ensure your drive train can handle the power -
- Ensure your face can handle the smiles -
This kit includes all the parts you need to do away with the slipper clutch in an SCX10 II "Kit" style transmission, like the AX90046.This will NOT fit the "AX10" style transmission found in the AX90047 RTR. You must be running the ASCX10 II style transmission found in the AX90046 kit.
Note that this kit will fit multiple bolt patterns of spur gears.
So if your spur does not line up during installation, rotate it one hole over ;)
We have tested with various Kimbrough, Axial, Traxxas, Robinson Racing, RC4WD and Duratrax spur gears in both 48p and 32p.
For the closest to stock replacement, we recommend the Duratrax DTXC9397 which is a 56t 32p unit.
If you want to source a different spur gear, our hub is drill for 2 patterns.
You can use the measurements when talking to any spur manufacturer:
3x22mm (each hole center is 11mm from center of hub)
3x23mm (each hole center is 11.5mm from center of hub)
We do recommend that you upgrade the rest of your drive train prior to installation:
DOWNLOAD INSTRUCTIONS HERE
Upgrade today and start putting 100% of your power to the ground!