RC4WD 1/10 Warn 9.5cti Winch

• Cast Aluminum Case
• Stamped Steel Components
• Working Spring Loaded Warn Hook
• Synthetic Winch Rope
  
• Highly Detailed
• Full Warn Decals Installed
• Voltage: 6v to 11.1v
  
• Can operate on 3 Cell Lipo
  
• Easily Rebuildable
• 3ft/.9M Rope Pre-Installed
• Same Mounting Locations as Bulldog Winch
  
• Load Limits: Dead Lift 6.6lbs/3kgs
• Load Limits: Rolling Drag 9lbs/4.1kgs
  
• 30 Day Warranty
  
• Length: 2.9in / 73.68mm
• Total Width: 1.25in / 31.75mm
• Height: 1.31in / 33.56mm
• Weight: 2.1oz / 60g

• 1x RC4WD 1/10 Warn 9.5cti Winch
• 1x RC4WD Warn Winch Pull Tag
  
• 4x M2.5x4mm SHCS (Black) (Z-S0760)
• 4x M2.5x6mm SHCS (Black) (Z-S0855)
• 1x Warn Decal Sheet
  

Required Parts:

• RC4WD Warn 1/10 Wireless Remote/Receiver Winch Controller Set (Z-S1092)
• RC4WD Wired Winch Control Unit (Z-S1089)

Replacement Parts:

• Replacement Motor/Gearbox for Warn 9.5cti 1/10 Winch (Z-E0051) OR 0322 Standard or 0325 High performance
• 1/10 Warn Hook (Z-S1011) or substitute 1122
• Synthetic Winch Line (Z-S0038)

• This winch requires a control unit. We offer both a wired (uses your radio's third channel) and wireless unit (hooks directly to a battery).
  
• This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures warranty.
• For RC4WD Warnings, Precautions, Safety and Damage Limits: Click Here
• Same mounting points as RC4WD Bulldog winches
• Dead Lift is defined as the winch lifting a product from a higher position with no help from the product being lifted.
  
• Rolling Drag is defines as a truck using its rolling force to help the winch pull a truck or products weight.
  

Warranty Definition:

• This product will be free from defects in materials and workmanship and fully functional when new.
  
• The gearbox can handle certain weight limits. If you over load the winch, the gearbox or motor will fail. This is not considered a warranty issue by RC4WD. 
  

Instruction Manual:

• Detailed Assembly Click Here

Warn and the Warn name are registered trademarks of Warn Industries. The Warn logo is property of Warn Industries.

This product has been tested and approved by the Recon G6. It is Recon G6 Certified.