Gunnar Tube - SCX10 Flat Top

Gunnar Tubes are the best way to strengthen the stock axle housing of your SCX10/AX10 vehicle.

Each tube is pinched inside your axle housing and secured with 2 screws through your C-Hub/Lock-Out. This gives you the benefit of additional weight down low and the strength of steel threads.

This "Flat Top" version features a raised portion that is pre-drilled and tapped to work in conjunction with our SCX10 Pro CMS Kit. The raised portion also gives you the additional benefit of more torque resistance making for an overall stiffer housing.

To install each tube you will need to remove material inside the housing.
We recommend a rotary tool AND a hobby knife for this operation.

For these flat top versions, you will need to remove just a hair more material than you would on a normal tube.
There is a small amount of material that must be cut out with a hobby knife for the flat top to fit in correctly.
So if your housings seem to not fit back together properly, please use the two pictures above as a cutting guide:


Specs:
Material: Steel
Weight: 22g
ID: 7mm
Finish: Black

SOLD INDIVIDUALLY