2.2" Wheel Widener (pair) Black

They will also fit any wheel using the Axial AX10 2.2" wheel beadlock ring mount pattern.

This version has a black anodized finish.

With these wideners you will get increased section width so your tires will look fatter and you will get that "deep dish" look to your wheels.
You will also have more room for foams and weights.

To use these wideners, insert one between your wheel and tire.
Then, utilizing M2x14 screws, affix the ring to the wheel & passing the screws through the widener.

What's included:
-2x 2.2" Wheel Wideners Black

Dimensions:
Bead Diameter - 2.2"
Width - 7.25mm
Weight ~ .5oz each

HARDWARE IS REQUIRED BUT NOT INCLUDED! To use these wideners with our wheels you will need 6 longer screws PER WHEEL. The longer screws replace the M2x7 screws that clamp the ring to the wheel. The screws that thread into your ring DO NOT need to be changed. For Single Wideners you need M2x14 screws. For stacked Single Wideners you need M2x21 screws. We suggest you use the same head style (scale hex or socket) as the screws threaded into your rings. M2x14 Screws M2x21 Screws

2.2" Rock Cutter SLW without widener:


With widener:

Mounted version with widener: