1.9' Wheel Widener (B)

1.9" Wheel Widener (B)

1 Review(s) Write a Review

Your Price: $7.99

Questions about this item? Ask here.

Part Number: 199B

Availability: In Stock

Quantity

Description
Customer Reviews
Questions and Answers

NOW SOLD INDIVIDUALLY!

Our 1.9" Wheel Wideners are designed to add 7.25mm of width to the face of any of our wheels. They will also fit any wheel using the Axial SCX10 1.9" wheel beadlock ring mount pattern.

With these wideners you will get increased section width so your tires will look fatter and you will get that "deep dish" look to your wheels. You will also have more room for foams and weights.

To use these wideners, insert one between your wheel and tire. Then, utilizing M2x14 screws, affix the ring to the wheel & passing the screws through the widener.

What's included:
-1x 1.9" Wheel Widener with a "Bright Finish".

Dimensions:
Bead Diameter - 1.9"
Width - 7.25mm

Weight ~ .5oz each

HARDWARE IS REQUIRED BUT NOT INCLUDED!

To use these wideners with our wheels you will need 6 longer screws PER WHEEL.

The longer screws replace the M2x7 screws that clamp the ring to the wheel.

The screws that thread into your ring SHOULD NOT be changed as some longer screws may not be fully threaded (see last pic in gallery).

For standard Wideners you need M2x14 screws.

For stacked standard Wideners you need M2x21 screws.

We suggest you use the same head style (scale hex or socket) as the screws threaded into your rings.

M2x14 Screws
M2x21 Screws

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

1.9 wheel widener

Awesome product. Can be installed on the inside or outside of the wheel. These really allow you to get the perfect width wheel to match the tire you're running. Everyone knows wider is better!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Dan Henson from Hartselle, Alabama on 4/1/2021

Q: What’s the difference between the widener’s b and the regular wideners

Asked by: Brian Hampton - 4/1/2022

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Locked Up RC (2/12/2025)

Submit an answer

Q: Regarding wheel wideners, what is the difference between - "Wheel Widener" and "Wheel Widener B" I am interested in getting a set of wheels with wideners but dont want to make the wrong choice when checking out. Also, which screws are best to fasten the wideners to the wheels.

Asked by: Geo - 6/2/2022

A: The Wideners (or any parts really) that have a (B) in the name means they are "Bright Finish".

Part number 199B is Bright finish
Part number 119H is Hand Finish

They are identical other than the finish.

Single wideners will need 6 M2x14 screws per wheel.
Double wideners will need 6 M2x21 screws per wheel.

Thanks!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Locked Up RC (2/12/2025)

Submit an answer

Q: Do the 1.9 wheel wideners have a 24 screw hole Vanquish compatible pattern?

Asked by: John Hamilton - 12/25/2023

A: Our wheels and rings are made to work together. Other than a few specific exceptions that we know of, we can't say what will/won't fit together.

Wheels we know WILL work with our rings:
Our 1.9" Rings and wideners will fit original SCX10 plastic 6 hole bead lock wheels, Redcat Racing plastic 1.9" 6 hole bead lock wheels and 1.9" Incision KMC (KM233, etc) Hex wheels by making use of our M2x1 screws in the additional 18 threaded holes in our rings. Meaning you will use 6 M2x7 screws to hold our ring to the wheel. The additional 18 holes in the rings will be filled with M2x1 screws as they are just for show (we call them faux).

If using wideners you can run 6 M2x14 (or m2x21 for double wide) to hold the widener & ring to the wheel The remaining 18 of the holes can use M2x7. (Wideners have not been tested on Incision wheels yet).

The same is true of our 2.2 rings with the original Axial AX10 plastic 6 hole bead lock wheels. 6 M2x7 & 18 M2x1, etc.

Our rings will also fit CNC Customs wheels the same way (6 M2x7 & 18 M2x1, etc) "IF" they are made to work with our ring pattern. You'll need to confirm the pattern in your wheels with CNC customs though as we have no way of knowing what one you have & they make a few types.

Wheels we know WILL NOT fit our rings:
Vanquish, Chanquish, SSD, Mayhem

Anything not listed above means we have not tested them. So we cannot guarantee anything one way or the other.

I hope that helps!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Locked Up RC (2/12/2025)

Submit an answer

Questions about this item? Ask here.