1.9' Wheel Double Widener

1.9" Wheel Double Widener

Write a Review

Your Price: $9.99

Questions about this item? Ask here.

Part Number: 199DH

Availability: In Stock

Quantity

Description
Questions and Answers

NOW SOLD INDIVIDUALLY!

Our 1.9" Wheel Double Wideners are designed to add 14.25mm of width to the face of any of our wheels. They will also fit any wheel using the Axial SCX10 1.9" wheel beadlock ring mount pattern.

With these wideners you will get increased section width so your tires will look fatter and you will get that "deep dish" look to your wheels. You will also have more room for foams and weights.

To use these wideners, insert one between your wheel and tire. Then, utilizing M2x21 screws, affix the ring to the wheel & passing the screws through the widener.

What's included:
-1x 1.9" Wheel Double Widener with a "Hand Finish".

Dimensions:
Bead Diameter - 1.9"
Width - 14.25mm
Weight ~ 1.2oz each

HARDWARE IS REQUIRED BUT NOT INCLUDED!

To use these wideners with our wheels you will need 6 longer screws PER WHEEL.

The longer screws replace the M2x7 screws that clamp the ring to the wheel.

The screws that thread into your ring SHOULD NOT be changed as some longer screws may not be fully threaded (see last pic in gallery).

For Double Wideners you need M2x21 screws.

We suggest you use the same head style (scale hex or socket) as the screws threaded into your rings.

M2x21 Screws

Q: Will these fit reefs rc wheels and vanquish wheels

Asked by: JLG - 2/14/2022

A: Our wheels and rings are made to work together. Other than a few specific exceptions that we know of, we can't say what will/won't fit together.

Wheels we know WILL work with our rings:
Our 1.9" Rings and wideners will fit original SCX10 plastic 6 hole bead lock wheels, Redcat Racing plastic 1.9" 6 hole bead lock wheels and 1.9" Incision KMC (KM233, etc) Hex wheels by making use of our M2x1 screws in the additional 18 threaded holes in our rings. Meaning you will use 6 M2x7 screws to hold our ring to the wheel. The additional 18 holes in the rings will be filled with M2x1 screws as they are just for show (we call them faux).

If using wideners you can run 6 M2x14 (or m2x21 for double wide) to hold the widener & ring to the wheel The remaining 18 of the holes can use M2x7. (Wideners have not been tested on Incision wheels yet).

The same is true of our 2.2 rings with the original Axial AX10 plastic 6 hole bead lock wheels. 6 M2x7 & 18 M2x1, etc.

Our rings will also fit CNC Customs wheels the same way (6 M2x7 & 18 M2x1, etc) "IF" they are made to work with our ring pattern. You'll need to confirm the pattern in your wheels with CNC customs though as we have no way of knowing what one you have & they make a few types.

Wheels we know WILL NOT fit our rings:
Vanquish, Chanquish, SSD, Mayhem

Anything not listed above means we have not tested them. So we cannot guarantee anything one way or the other.

I hope that helps!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Locked Up RC (2/12/2025)

Submit an answer

Questions about this item? Ask here.

M2 x 21mm Scale Hex Bolts (30) Black

$7.75

(1)

In Stock

Add To Cart

M2 x 21mm Scale Hex Bolts (30) MC Zinc

$7.75

In Stock

Add To Cart

M2 x 21mm Scale Hex Bolts (30) SS

$7.75

In Stock

Add To Cart

1.9" Wheel Double Widener

Q: Will these fit reefs rc wheels and vanquish wheels

Related Items

Recently Viewed Items