Our 1.9" Agile bead lock ring replicates most heavy duty 1:1 bead lock rings.
The slim design is perfect for those that want to see the most of their wheels.
Made of high quality carbon this ring is drilled to match the Axial SCX 1.9" bead lock ring mounting pattern.
***Because this ring is carbon fiber is is slightly different than our STANDARD Easy Mount Rings.
Like our standard Easy Mount Rings, 6 screws will pass through & 18 holes can be loaded with screws.
The change is that the 18 additional Easy Mount holes are NOT tapped.
That means YOU will be threading the screws into untapped holes (similar to screwing into a plastic hole).
Over tightening the screws WILL strip the holes, so once the screw bottoms out, stop tightening immediately.
What's included:
-1x 1.9" Agile Carbon Fiber bead lock ring
Dimensions:
Bead Diameter - 1.9"
Width - 3mm
Weight - .25oz
Our Easy Mount® wheel system only uses 6 screws to hold the ring to the
wheel, making your life much easier when working with
foams and weights.
An additional 18 screws thread into the ring and slide into larger holes
in our Easy Mount® wheels. We suggest M2x7 (or M2x8) screws to hold the
ring on. The remaining 18 screws can be M2x8 or shorter.
If you do not have our Easy Mount® wheels you can still use our Easy
Mount® rings by using 18 of our M2x1 screws to thread into the ring.
If
you already have your own M2 hardware of your choice, you can cut it
flush with the back of the ring like we used to do for all our
installations:
Old School Video (action starts ~ 3:00)
No hardware is included with our rings but is
available below.
M2x7 Scale Hex Bolts:
Stainless Steel,
Black Oxide,
Multi Color Zinc
M2x1 Scale Hex Bolts:
Stainless Steel,
Black Oxide,
Multi Color Zinc
M2x7 Cap Screws:
Stainless Steel,
Black Oxide,
Multi Color Zinc Trademark & Patent Information
Hello, Guest! 
[ITEMPRICE]