These Ultra Scale hubs cover your existing wheel nuts and thread on your M4 axle stubs.
To make room for your existing wheel nut these are a little taller than our "Nut Replacement" version.
Because there is no nylon nut inside, they can be threaded on by hand ... no tool required.
We do recommend you apply some liquid electrical tape to your threads before installing.
This helps prevent them from vibrating off.
You can also use small bits of plastic bag strips or winch line.
-Aluminum main body with black anodized finish in recesses
-Steel collar with black oxide finish
-2 hubs per order
At less than 10.2mm in diameter, they are perfect for our wheels, Mayhem, VP and several other brands!
These are compatible with Vanquish Products SLW style hex hubs.
The steel collars are finished with black oxide to give a realistic 1:1 appearance. Since they are steel, they may surface rust over time for an even more realistic look. If you would prefer to keep the black look a simple coating of gun oil will do the trick and of course they can be painted!
These hubs require some axle shaft to protrude from your wheel nut and may require you to trim your shaft for perfectly flush fit to your wheel.
Height compared to a "Nut Replacement" style:
Mounted on a 1.9" Recluse AO8™with Agile Orange Two Tone ring, scale hex bolts and Acorn nuts (not included) :
TEAM DRIVER TIP:
You can use a dab of lock-tite, liquid electrical tape, small piece of paper, piece of thread, etc to provide some vibration resistance with these hubs.
Apply on the axle tip after putting the nut on and it will help keep your hubs put.