Most of you know how strong a servo winch can be. But
to make your own you have to risk cutting up your own servo gears, soldering electronics, tuning pots, finding decent winch line, a good hook and then ... messing with a bobbin!?
Our RTR Servo Winches give you PLENTY of power, no creep, no messing
with pots or soldering. They are as easy to use as any standard servo
right out of the box. There is no cutting into the housing of the servo,
so they remain structurally sound AND all the electronics are INSIDE
the housing. So you get a nice small package!
Each servo uses a HeyOK "High Voltage" MOSFET controller set in Plasti Dip and shrink wrap by HeyOK to be waterproof.
Modified 180in/oz MG946R servo
HeyOK High Voltage MOSFET Controller
Includes a LURC Hogshead spool
Each winch is assembled and quality tested in the USA by Locked Up RC!
We consider these winches to be "RTR" but you will need to attach the spool, tie on the included winch line and hook as well as install the winch saver if ordered.
The controllers should be kept to 9v or less and the receiver and winch controller need to be operated from the same BEC.