An easy way to add more realism to your scaler.
Not everyone wants turn signals on their rig, but brake lights and reverse lights are used on most vehicles.
This is a circuit that that will let
you easily add brake lights, reverse lights and there is also an
output for running driving lights.
This is a small controller that you "wedge" into CH2 between your
receiver and your ESC. There are three servo plugs on its output to plug
into your lighting.
is kind of clever. When the brakes aren't on, the brake lights glow
dimly to mimic tail lights. The brakes are on when the throttle control
is in neutral. Uses the connector labeled BRK
you push on the throttle control to go backwards, this will supply
power to the reverse lights. Uses the connector labeled REV
you pull on the throttle to move forward, this output turns on. Maybe
connect it to a set of high beams or driving lights or a light bar.Uses
the connector labeled FWD