This Heavy Duty transmission case is the perfect replacement for your Axial AX10/SCX10 transmission case!
Made of aluminum with a nice black anodized finish, it's a great way to gain a more rigid case and stronger mounting holes without adding a ton of weight.
This case differs from the other Devil case because this case can NOT be "mirrored" unless you "DIY" drill out the case.
IF you want to DIY mirror it:
-The top shaft is 5mm OD & the bearing is 10mm OD.
-The hole would need to be be >5mm and <10mm
-You do not need to be perfectly centered, just make the hole large enough for the shaft to pop through.
-We'd recommend a 1/4" drill bit (5mm=.196" / 10mm=.393").
--You would also want to make a cap/plug for the other side.