From drag strips to circle tracks to desert baja courses, this style
of wheel can be seen on just about any classic racing vehicle you can think of.
So it's no surprise that our TNTD 4 contestant "Killa-Cotton" selected the name ... and it's no surprise that the fans loved it!
This wheel is designed to work with an AO8™ style axle flange and any of our 1.9" Easy Mount® rings (sold separately).
This version has been grooved around the exterior to reduce the weight by over .5oz.
-1x 1.9" Heritage AO8™ wheel
-1x Inner bead lock ring
-6x M2x8 cap screws
Dimensions (with plain rings & hardware):
Bead Diameter: 1.9"
Our Easy Mount® wheel system only uses 6 screws to hold the ring to the
wheel, making your life much easier when working with
foams and weights.
An additional 18 screws thread into the ring and slide into larger holes
in our Easy Mount® wheels. We suggest M2x7 (or M2x8) screws to hold the
ring on. The remaining 18 screws can be M2x8 or shorter.
Outer rings and hardware are NOT included with the wheel
Outer rings (sold separately):
Bolt pattern hardware (sold separately):
M2 Mag Acorn Nut Wheel Studs
Cap Screws (M2x7)
Trademarks & Patents: http://www.lockeduprc.com/Trademark-Patent-Information_ep_39-1.html
Mounted images shown with optional parts and accessories:
1.9" Heritage AO8 with Agile Rings, Scale Hex Bolts,Scale Hub, and M2-Mag Acorn Nuts