Our 12mm x 4.65mm Aluminum Hex Hubs will work with most 1:10 scale RCs and offer backspacing similar to other narrow width hexes.
These are a suitable replacement for the Axial ax30427.
These wheel hexes can accommodate hex pins up to 2x11mm
which is great if you have thicker axle shafts.
These are also known as wheel hexes.
4-5mm step center hole (most standard 1:10 size)
12mm wide across the flats
Black anodized finish
Four aluminum hex hubs
Four set screws
Note that the pin to face distance of this hex is 2.85mm